Abrasive wear resistance of matrix composites carbon fiber reinforced polymers
Klaudia Olejniczak
Uniwersytet Warmińsko-MazurskiJerzy Napiórkowski
Abstrakt
The paper presents the results of the abrasive wear resistance test of composites based on polymers reinforced with carbon fibers. Two types of fiber composites obtained from a yacht manufacturer were used for the tests. The tests were carried out using the ball-cratering method without abrasive suspension. On the basis of the specific wear rate Kc, better tribological properties of the polyester matrix reinforced with glass fabric were observed compared to the polyester matrix reinforced with a glass emulsion mat. The composite material reinforced with glass cloth was characterized by smaller crater diameters, which may cause plastic deformation due to the low hardness of the material.
Słowa kluczowe:
Abrasive wear, fibrous composites, carbon fibers, polyester resin, ball- catering metodBibliografia
ABD EL-BAKY M.A., KAMEL M. 2019. Abrasive wear performance of jute-glass-carbon-reinforced composites: Effect of stacking sequence and fibers relative amounts. Journal of Natural Fibers, 18(2): 213-228. https://doi.org/10.1080/15440478.2019.1616347. Google Scholar
BARTON J., NIEMCZYK A., CZAJA K., KORACH Ł., SACHER-MAJEWSKA B. 2014. Kompozyty, biokompozyty i nanokompozyty polimerowe. Otrzymywanie, skład, właściwości i kierunki zastosowań. Chemik, 68(4). Google Scholar
CHANG H.W. 1982. Correlation of wear with oxidation of carbon-carbon composites. Wear, 80(1): 7-14. Google Scholar
DOBROSZ K., MATYSIAK A. 1986. Tworzywa sztuczne: materiałoznawstwo i przetwórstwo: podręcznik dla technikum chemicznego. Wydawnictwa Szkolne i Pedagogiczne, Warszawa. Google Scholar
EL-SAYED A.A., EL-SHERBINY M.G., ABO-EL-EZZ A.S., AGGAG G.A. 1995. Friction and wear properties of polymeric composite materials for bearing applications. Wear, 184(1): 45-53. Google Scholar
FEJDYŚ M., ŁANDWIJT M. 2010. Włókna techniczne wzmacniające materiały kompozytowe. Techniczne Wyroby Włókiennicze, 18: 12-22. Google Scholar
JESTHI D.K., NAYAK R.K. 2020. Influence of glass/carbon fiber stacking sequence on mechanical and three-body abrasive wear resistance of hybrid composites. Materials Research Express, 7(1): 015106. Google Scholar
LHYMN C., LIGHT R. 1987. Effect of sliding velocity on wear rate of fibrous polymer composites. Wear, 116(3): 343-359. Google Scholar
MAYER P., KACZMAR J.W. 2000. Properties and applications of carbon and glass fibers. Tworzywa Sztuczne i Chemia, 6: 52-56. Google Scholar
OLEJNIK M. 2008. Nanokompozyty polimerowe – rola nanododatków. Techniczne Wyroby Włókiennicze, 16: 25-31. Google Scholar
SURESHA B., CHANDRAMOHAN G., SAMAPTHKUMARAN P., SEETHARAMU S., VYNATHEYA S. 2006. Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites. Journal of Reinforced Plastics and Composites, 25(7): 771-782. Google Scholar
SZLEZYNGIER W. 1996. Tworzywa sztuczne: chemia, technologia wytwarzania, właściwości, przetwórstwo, zastosowanie. Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów. Google Scholar
WANG J., GU M., SONGHAO B., GE S. 2003. Investigation of the influence of MoS2 filler on the tribological properties of carbon fiber reinforced nylon 1010 composites. Wear, 255(1-6): 774-779. Google Scholar
XIONG X., SHEN S.., ALAM N., HUA L., LI X., WAN X., MIAO M. 2018. Mechanical and abrasive wear performance of woven flax fabric/polyoxymethylene composites. Wear, 414: 9-20. Google Scholar
Uniwersytet Warmińsko-Mazurski
