EVALUATION OF THE INFLUENCE OF THE LASER ALLOYING WITH Cr, B AND Ni OF GREY IRON PARTS ON THEIR WEAR RESISTANCE
Marta Paczkowska
Politechnika PoznańskaAbstrakt
The aim of this research was to evaluate the influence of the laser alloying with Cr, Cr+B+Ni and B+Ni on the wear resistance of grey iron. Agricultural component (coulter flap) exposed on friction wear (as well as corrosion) in the soil has been take into account as a tested machine part. Even 85% decrease of mass loss of the coulter flap with laser alloyed layer (with nickel and boron) after wear test in comparison to mass loss of flap without laser treatment was achieved. In case of alloying with chromium it was 44% and in case of nickel, boron and chromium this decrease was 58%. Laser alloying in each perormed variant caused formation of the modified surface layer consisting of fine grains of mainly martensite enriched with alloy elements, increase of hardness of the surface layer and reduction of roughness parameters of the treated surface in comparison to the base surface.
Słowa kluczowe:
laser alloying, wear resistance, grey ironBibliografia
BURAKOWSKI T., WIERZCHOŃ T. 1995. Inżynieria powierzchni metali. Wydawnictwo Naukowo-Techniczne, Warszawa. Google Scholar
CATALÁN N., RAMOS-MOORE E., BOCCARDO A., CELENTANO D. 2022. Surface Laser Treatment of Cast Irons: A Review. Metals, 12(4): 562. https://doi.org/10.3390/met12040562 Google Scholar
COSTA A.R. DA, VILAR R. 1997. Erosion by Solid Particle Impingement: Experimental Results with Cast-Iron, Laser-Treated Surface. Tribology Letters, 3(4): 379–385. Google Scholar
FELDSHTEIN E., DEVOJNO O., PATALAS-MALISZEWSKA J., KARDAPOLAVA M., KASIAKOVA I. 2023. Effect of Processing Parameters on the Formation of Alloyed Surface Layer and Its Properties on the Efficiency of Laser Alloying of Grey Cast Iron with Tungsten and Silicon Carbides. Materials, 16(18): 6230. Google Scholar
FELDSHTEIN E., DEVOJNO O., WOJCIECHOWSKI S., KARDAPOLAVA M., KASIAKOVA I. 2022. On the Microstructure, Microhardnessand Wear Behavior of Gray Cast Iron Surface Layer After Laser Strengthening. Materials, 15: 1-12. Google Scholar
JANICKI D. 2020. Effect of Chromium and Molybdenum Addition on the Microstructure of in Situ Tic-Reinforced Composite Surface Layers Fabricated on Ductile Cast Iron by Laser Alloying. Materials, 13: 1-17. Google Scholar
JANICKI D., CZUPRYŃSKI A., GÓRKA J., MATUS K. 2024. Effect of Cooling Rate on Microstructure of in Situ Tic-Reinforced Composite Surface Layers Synthesized on Ductile Cast Iron by Laser Alloying. Materials, 17(4): 932. Google Scholar
KOTARSKA A. 2021. The Laser Alloying Process of Ductile Cast Iron Surface with Titanium. Metals, 11(2): 282. https://doi.org/10.3390/met11020282 Google Scholar
KUSIŃSKI J. 2000. Lasery i ich zastosowanie w inżynierii materiałowej. Akapit, Kraków. Google Scholar
LONT A., GÓRKA J., JANICKI D., MATUS K. 2022. The Laser Alloying Process of Ductile Cast Iron Surface with Titanium Powder in Nitrogen Atmosphere. Coatings, 12(2): 227. https://doi.org/10.3390/coatings12020227 Google Scholar
MINLIN Z., WENJIN L., HONGJUN Z. 2006. Corrosion and Wear Resistance Characteristics of Nicr Coating by Laser Alloying with Powder Feeding on Grey Iron Liner. Wear, 260(11-12): 1349-1355. Google Scholar
NAPIÓRKOWSKI J., LEMECHA M., KONAT Ł. 2019. Forecasting the Wear of Operating Parts in an Abrasive Soil Mass using the Holm-Archard Model. Materials, 12: 2180. Google Scholar
PACZKOWSKA M. 2008. Możliwości modyfikacji struktury i własności warstwy powierzchniowej elementów maszyn przez borowanie laserowe. Inżynieria Materiałowa, 29(6): 585-590. Google Scholar
PACZKOWSKA M. 2013. The Possibility of Selected Surface Layer Modification of Nodular Iron Engine Parts by Laser Boronizing. Vehicle Engineering (VE), Science and Engineering Publishing Company, 1(3): 64. Google Scholar
PACZKOWSKA M. 2016a. The Evaluation of the Influence of Laser Treatment Parameters on the Type of Thermal Effects in the Surface Layer Microstructure of Gray Irons. Optics and Laser Technology, 76: 143-148. Google Scholar
PACZKOWSKA M. 2016b. The Importance of Operating Conditions and Parameters on Laser Alloying with Silicon During Surface Layer Modification of Nodular Iron. Lasers in Engineering, 33(4-6): 305-326. Google Scholar
PACZKOWSKA M., RATUSZEK W., WALIGÓRA W. 2010. Microstructure of Laser Boronized Nodular Iron. Surface & Coatings Technology, 205: 2542-2545. Google Scholar
PACZKOWSKA M., SELECH J. 2022. Microstructure and Soil Wear Resistance of Grey Cast Iron with Ni and Cr. Materials, 15(9): 3153-1-3153-14. Google Scholar
PACZKOWSKA M., WOJCIECHOWSKI Ł. 2007. Adhesive Wear Tests of Nodular Iron Parts after Laser Boronizing. Tribologia, 3-4: 71-83. Google Scholar
WEI L. DENG L. 1998. Laser Alloying on Chromium Coated Surface of Nodular Cast Iron. Transactions of Nonferrous Metals Society of China, 8(3): 496-499. Google Scholar
XIN T., HONG Z., LUQUAN R., ZHIHUI Z., REN-DONG C., WEI Z. 2008. Thermal Fatigue Characteristics of Grey Cast Iron with Non-Smooth Surface Treated by Laser Alloying of Cr Powder. Surface and Coatings Technology, 202(12): 2527-2534. Google Scholar
Politechnika Poznańska
